Release Notes

November 4, 2026

Choose your primary Scope 2 method in the Advanced GHG report

You can now choose whether your Advanced GHG report uses market-based or location-based Scope 2 as its primary method. The report states which method it uses, so anyone reading it knows how the Scope 2 figures were calculated.

November 3, 2026

Manage invoices for all your facilities in one place

The new Consumos tab in Facilities brings your organization’s invoices together in a single view. You can review and filter them, and delete them in bulk, which saves you from opening each facility one by one.

October 30, 2026

Favorites: your key pages, always at hand

You can now star any shareable page and find it under Favorites in the sidebar. Rename each favorite, pick an icon for it, and drag to reorder the list. This keeps the pages you use most one click away, so you spend less time navigating.

October 28, 2026

Create a generic declaration of conformity for multiple PPWR products

You can now select several products, create a single generic declaration of conformity, and send it to your customer with one click. This saves you from preparing a separate declaration for each product when the same one applies to all of them, which makes PPWR compliance paperwork faster to handle.

October 27, 2026

A new GHG report, clearer and always at hand

The new GHG Report Simple includes a cover page, a clickable index, and your company logo. Each report is saved in My reports, so you can find it again whenever you need it. The Dcycle report has been retired, and the GHG Report Simple replaces it.

October 26, 2026

New card: data quality of your purchases

Your carbon footprint dashboard now includes a card that shows how much of your purchases emissions rely on real data. It also explains how to improve that share, so you can make your footprint more accurate and reliable.

Log fuel with just the amount you paid

You can now log your vehicles’ fuel using only the amount spent in euros. We work out the litres and the emissions for you, so you don’t need to dig up extra details from your receipts.

October 20, 2026

Get ready for EcoVadis without the guesswork

Leia now checks your documents against EcoVadis acceptance rules and tells you how to answer each question, including which evidence to use and which pages to cite. It also gives you a pre-score before you submit, so you can spot gaps and fix them while there is still time.

October 15, 2026

Voluntary Standard (VS): sustainability reporting for companies outside CSRD scope

You can now create a Voluntary Standard (VS) project to prepare a voluntary sustainability report under Delegated Regulation (EU) 2026/1560. The project comes with pre-loaded datapoints, automatic dashboards, and a ready-made report. Leia can also answer questions using your own documents, which helps companies outside CSRD scope report without starting from scratch.

October 14, 2026

Electricity and water on one invoice? Dcycle reads each one

Upload an invoice that bills electricity, water or fuel and Dcycle extracts each service separately. You no longer need to split the PDF or upload duplicate files, which saves time and keeps your data cleaner.

Integrations is now Connections: only what works today

The Integrations tab is now called Connections and brings together the ways you can already bring your data into Dcycle. Each one includes a short video explaining how it works, so you can pick the right option faster.

October 13, 2026

Leia drafts your CSRD answers from your documents

Upload the documents you already have and Leia drafts answers for your CSRD datapoints. You don’t need to master every ESRS requirement first, so getting started is much easier.

Review and confirm Leia’s CSRD answers with the evidence

Before you confirm a Leia answer, you can see what the standard requires, what’s missing and which document backs it. You can confirm answers one by one or in bulk.

October 7, 2026

EU Taxonomy: from your activities to the report

You can now prepare your EU Taxonomy disclosure directly in Dcycle. The process covers your activities, figures, and criteria, and includes the official templates in Excel. This keeps your data and your report in one place, so you don’t have to assemble them separately.

October 5, 2026

Edit your GLEC logistics carbon footprint data

You can now edit any fuel consumption or shipment data directly from your GLEC logistics carbon footprint project. This lets you correct mistakes or update figures without having to recreate entries, so your emissions calculations stay accurate.

October 2, 2026

Waste operator and carrier, now tracked separately

Dcycle now tells the waste transfer operator and the carrier apart in your waste documents. Previously these two roles could be read as a single party, which made it harder to trace who handled your waste at each stage. With them recorded separately, your data is clearer and easier to present in an audit.

September 30, 2026

More precise Scope 2: Heating and Cooling now separated from electricity

Until now, purchased energy consumption was grouped under “Electricity.” We have added a new Scope 2 subcategory: Heating and Cooling. It covers the heat, steam, and cooling your organization buys from a district heating and cooling network, so these emissions are reported separately from electricity.

September 23, 2026

Effortless follow-up for your ISO management system

Discover the new follow-up tray, owners, notifications and comments that turn every nonconformity into actions someone owns. This makes it easier to track progress on your ISO 9001 and ISO 14001 management system and ensures nothing falls through the cracks.

September 16, 2026

Your workplace mobility plan, now a report

When you create a report inside a mobility project, you now get the whole document with every section in place and a colour-coded guide inside each one: black for the text you can keep, orange for the gaps that change from company to company, and small blue type explaining what that section is for and how to build it. You delete the blue as you go, and what is left is your plan. It behaves like any other report, with the same editor, version history and export, and you can embed eleven visualizations built on your own data: modal split by mode and by work centre, diagnosis indicators year by year, commuting and workplace accidents, the footprint of your commutes, and the monitoring grid.

September 14, 2026

A new way to calculate waste

You can now choose the database you want to use to calculate waste, depending on the methodology or requirements of your project. This gives you more flexibility when working with different reporting standards or regional requirements.

September 7, 2026

Choose which organizations belong to a project

You can now pick the exact organizations that participate in a project — they’re the only ones who see it, and only their data and results are included. This gives you precise control over multi-organization collaboration and keeps project visibility scoped to the relevant stakeholders.

August 28, 2026

ESRS report visualizations, built the moment you create the project

Creating a CSRD/ESRS project now auto-generates every quantitative table and visualization Dcycle can calculate from your data, organized by ESRS and ready to report. No more manual setup — launch a project and the metrics appear instantly.

August 27, 2026

See any metric as a percentage in your visualizations

Any consumption, emission, or expense metric can now display as a percentage in charts and tables. Comparing results, identifying hotspots, and spotting trends just got easier.

Vehicles with multiple fuels

Record consumptions of multiple fuels on a single vehicle, each calculated with its correct emission factor. Measure your fleet more accurately, especially for hybrid or flex-fuel vehicles.

August 26, 2026

Give roles exactly the access they need

Roles can now be scoped to specific investees, facilities, and custom categories — not just Dcycle categories. Admins can grant exactly the access a role needs, nothing more, tightening governance without micromanaging permissions.

Share PPWR Declarations of Conformity with stakeholders

Give clients, auditors, or partners secure, trackable access to exactly the Declarations of Conformity they need — nothing more. Control what each stakeholder sees without duplicating files or losing audit trails.

Direct GRI traceability in your EINF data

Each EINF datapoint now links to its corresponding GRI standard, with instant access to the exact page of the official document. Trace every disclosure back to the framework requirement that demands it.

August 18, 2026

Search anything, from anywhere

Press Cmd+K and jump to any section, facility, or vehicle by typing just a few letters. The global search cuts through navigation layers and gets you where you need to be in seconds.

Dictate to Leia with your voice

Hit the mic, talk, and what you said appears as text in the chat, ready to review and send. Asking complex questions is now as fast as saying them out loud.

August 7, 2026

Customize your mobility surveys

Create mobility surveys tailored to your company: choose the work model, edit the questions, add conditional logic, and send them in the language you prefer. Match the survey to how your teams actually work, not a generic template.

August 6, 2026

PPWR supplier portal gets faster, friction-free

The renewed PPWR supplier portal lets suppliers attest compliance in their own language, without impossible lab data requirements. Faster responses, higher completion rates, less back-and-forth.

August 4, 2026

Link your suppliers to your packaging units in PPWR

Create suppliers, assign them packaging units, and request compliance data once for all their products. No more redundant supplier outreach for every SKU.

Manage your PPWR packaging units from the CLI

Manage your PPWR packaging units and SKUs directly from the Dcycle CLI, ideal for bulk updates and automation. Scripting replaces spreadsheet gymnastics.

August 3, 2026

FLAG: forest, land and agriculture emissions

Measure emissions from your crops, land units, and agricultural suppliers using official MITECO factors by province. FLAG emissions are now calculated with the same rigor as Scope 1, 2, and 3.

July 31, 2026

Elastic Data: upload any data to Dcycle, no limits

Until today you worked with Dcycle’s built-in categories and fields. Now you shape Dcycle to your reality: create your own categories and extend the ones you already use with the fields you need. All your data, in one place.

Elastic data visualizations: Turn your own data into insights, without leaving Dcycle

Your data isn’t just stored anymore — now you analyze, visualize and share it in seconds. Build custom charts and dashboards from any data you’ve uploaded to Dcycle, making it easier to spot trends and communicate findings across your organization.

July 30, 2026

Bulk vehicle editing

You can now edit multiple vehicles at once, saving time when updating ownership, usage, vehicle type, country of operation, or fuel across several records. Select the vehicles you need to change and apply updates in one step.

July 29, 2026

New calculation method for goods shipped and received, employee commuting, and purchases

Emissions calculations for goods shipped and received, employee commuting, and purchases get a new methodology: more precise, fully traceable, and with access to new official databases. This update improves accuracy and transparency across your Scope 3 reporting.

July 23, 2026

Automatic import from packaging technical sheets

Upload your packaging technical sheet and let Dcycle extract the data to automatically create or update your packaging units. This saves manual entry time and reduces the risk of transcription errors.

July 22, 2026

Improved translations for Data upload and Hotel stays

Discover clearer translations on the Data upload page and Hotel stays section, now available in all supported languages. These improvements make it easier for international teams to navigate and use Dcycle.

July 21, 2026

New PPWR format checks for packaging units

Discover the new PPWR format checks that flag void-space limits, single-use plastic bans, and reuse targets on your packaging units. These checks help you stay compliant with evolving EU packaging regulations.

July 20, 2026

Split Invoices in Bulk Across Facilities

Apply the same consumption-split rule to multiple invoices at once, instead of editing them one by one. This makes it faster to allocate energy and utility usage across multiple sites.

New: Verifications Hub

Preparing and passing a carbon footprint verification is now simpler with the new Verifications Hub. It brings together two dedicated guides: a step-by-step method for clients (the 3-stage method, the pre-verification checklist, Guarantees of Origin, Scope 3, Dcycle’s internal pre-audit and the final report, with embedded walkthrough videos) and a technical guide for verifiers showing exactly where to find and validate every data point in Dcycle in reader mode. Screenshots open full size on click.

July 6, 2026

Waste emissions breakdown

We’ve split waste emissions (Scope 3, Category 5) into two components: management emissions from waste treatment and transport emissions from hauling waste to the facility. If your waste records include the distance to the treatment center, the breakdown appears automatically across pivot tables, reports, and Excel downloads.

Organizations following SBTi’s “Beyond the Boundary” approach can independently toggle waste transport in their GHG reports through project settings.

July 3, 2026

Wastewater treatment in pivot tables

You can now create pivot tables and visualizations from wastewater treatment plant data. The new “Waste water treatment” category adds 11 measures including CO2e emissions, influent and discharged water volumes, sludge, biogas, and organic-load ratios like BOD and COD. Data can be segmented by water type, facility, location, and time period.

July 2, 2026

Packaging catalog bulk import

Import your full packaging catalog with all materials in a single file. The updated template uses a one-row-per-component format, so you can describe complete bills of materials including recycled content percentages. Re-uploading the same file updates existing entries without creating duplicates. This is especially useful for PPWR compliance, which requires full material breakdowns.

June 30, 2026

Duplicate file warning during upload

Leia now detects potentially duplicate files during the classification phase of document uploads. When a duplicate is found, you’ll see a clear notice referencing the original document and can decide how to proceed. This prevents the same invoice from being counted twice, which improves audit accuracy and verification reliability.

June 29, 2026

Multi-product LCA

The LCA module now supports multiple final products from a single process. You can model co-products within one LCA, save each as a reusable part for future assessments, and allocate environmental impacts using economic, mass, energy, or custom percentage methods. Learn more about LCA in Dcycle.

LCA reports in PDF or Word

Generate LCA reports directly from the platform using the new Report Builder. The default template comes pre-populated with data, charts, and text aligned with ISO 14040, 14044, and 14067 standards. Customize the content with the built-in editor, then download as PDF or export to Word.

June 25, 2026

ISO risks and non-conformities by site

You can now assign risks, opportunities, and non-conformities to specific facilities instead of managing everything at the organization level. A new facility column and filter in the registers let site owners focus on their location’s concerns, streamlining internal audits and per-site reporting.

June 23, 2026

Improved business travel calculations

We’ve overhauled emissions calculations for business travel with full decimal precision from official sources and the flexibility to choose between DEFRA and Ecoinvent databases. Hotel overnight stays are now included as a new calculation category. We recommend recalculating historical data to take advantage of the improved methodology.

New emission factor database: HuellaChile

HuellaChile, Chile’s official emission factor program from the Ministry of the Environment, is now available in Dcycle. Both 2024 and 2025 versions are included, covering Scope 1 and 2 factors for vehicles, electricity, and combustion. Select the applicable year in your emission factors settings to apply them automatically.

June 17, 2026

Consolidate duplicate electricity CUPS

A new tool in Data > Facilities lets you view all electricity supply point codes (CUPS) across your organization, find duplicates, and merge them in one action. All affected invoices are updated automatically, so you can fix dozens of records at once instead of editing them individually.

June 16, 2026

Transparent data uploads with Leia

Leia now provides step-by-step feedback when you upload files: storage, classification, data extraction with facility identification, manual review, and final categorization with calculated metrics. You can monitor processing progress while continuing other work.

Create visualizations with Leia

Ask Leia to build dashboard widgets using natural language. Describe what you want (“water consumption by facility in a table”) and Leia selects the right category, dimensions, metrics, and dates. You can also modify existing widgets through conversation. Available in Spanish, English, and other languages.

June 11, 2026

Bulk purchase upload for holding organizations

Holding organizations can now upload purchases for multiple subsidiaries in a single CSV file, routing each row to the right child organization automatically.

June 10, 2026

Estimate emissions for non-respondent employees

Estimate emissions from employees who did not complete the mobility survey, for your company or across your entire corporate group. Learn more.

June 9, 2026

Surveys to collect any type of data

Create custom surveys with multiple answer types and launch data collection campaigns via email to your entire team.

June 8, 2026

Share visualizations with child organizations

Share project visualizations with child organizations in your group, giving them read-only access to your dashboards.

GLEC logistics guides

Five beginner-friendly guides to help you navigate GLEC autonomously, covering key concepts, transport operations, hub operations, fuel consumption, and reports.

May 27, 2026

New calculation method for water

Water emission calculations now use a more accurate methodology with full traceability and access to new official databases.

Emission factor details

You can now view the full details of each emission factor directly from the platform, without leaving your workflow.

Download emission factors in Excel

Export emission factors to Excel directly from the platform, selecting the records and columns you need.

Emission factor database catalogue

Explore all emission factor databases available in Dcycle from a centralized catalogue, with detailed information on versions, countries, categories, and usage in your account.

May 26, 2026

Self-consumption data in electricity

Log the energy generated by your solar panels directly from the electricity section, without needing to create custom emission factors. The platform automatically applies the correct emission factor for photovoltaic self-consumption.

May 19, 2026

Real-time collaboration in reports

For the first time in Dcycle, multiple people can work in the same report simultaneously.

Redesigned reports experience

We’ve rebuilt reporting inside projects. Reports are no longer just exports – they’re now a full product experience with a redesigned interface.

May 14, 2026

MITECO 6.0 emission factors

The latest version of MITECO’s emission factors, version 6.0, is now available in Dcycle.

Edit emission factor references

You can now change the exact database reference to fine-tune which emission factor is applied to your data. Previously you could only change the database and version, but not the specific reference.

May 12, 2026

Custom KPI campaigns

Collect custom KPI data: create any KPI you need, send invitations, get automatic reminders, and always know who has submitted and who hasn’t. Learn more.

ISO 14064 projects

A new project type that mirrors the ISO 14064 taxonomy 1:1 – same categories, same KPIs, same numbering – with Dcycle’s filtering, dashboards, and per-category methodology guidance on top.

May 11, 2026

Improved invoice reading with confidence indicator

We’ve integrated a more powerful OCR for automatic invoice reading across combustion, electricity, water, and recharges, with higher accuracy, per-field confidence indicators, and the original PDF attached as evidence.

May 6, 2026

LCA block assumptions and comments

Document assumptions and collaborate with your team directly on the blocks of your Life Cycle Assessment scenarios.

New calculation methodology for combustion, recharges, and electricity

We’ve revamped the calculation of combustion, recharges, and electricity emissions to give you more accurate results, the ability to choose between several emission factor databases, and full step-by-step traceability.

April 22, 2026

Vehicle spend in pivot tables

Analyze fuel and consumption spend for your vehicles in pivot tables, broken down by company, currency, license plate, type, and more.

April 21, 2026

Emission method selector in pivot tables

Pivot tables now let you choose between market-based and location-based emissions for Scope 2, preventing double-counting in calculations.

Carbon footprint Control Panel moves into GHG projects

The classic Control Panel now lives inside GHG Protocol projects. If you didn’t have a project created, we’ve automatically created one so you don’t lose access to your dashboard.

Configurable GHG project scope

Your GHG Protocol project now adapts to the scope you report. Mark only the categories that apply from Project Settings and the entire project reconfigures: data, processing, control, and downloads.

Data category methodology guidance

Inside each category of your GHG project you now see what data you need to upload, which KPIs are calculated, the complete formula, and the emission factor applied.

April 15, 2026

Projects (formerly Groupings)

We’ve redesigned how you organize and compare entities in Dcycle. Projects replaces the old Groupings feature with a more flexible, collaborative approach. Create projects to group facilities, vehicles, or any entity, compare emissions across projects and time periods, share with specific team members, and export project-level reports. Read the full guide.

Improved CSV imports

CSV imports are now up to 3x faster with real-time validation as you upload, better error messages with row-level detail, support for Excel files (.xlsx), and automatic date format detection.

Dashboard improvements

A new data completeness widget shows how much data has been entered vs. expected. The year-over-year trend chart now supports custom date ranges, and quick action buttons appear at the top of the dashboard.

April 10, 2026

Fuel consumption in pivot tables

Analyze stationary and mobile fuel consumption together in a single pivot table, broken down by fuel type.

April 8, 2026

Bulk invoice deletion

Select, preview, and delete multiple invoices in one go. No more one-by-one editing.

EINF workforce visualization templates

Create 14 workforce pivot tables with a single click in EINF/GRI projects.

April 6, 2026

Survey deadline for employee mobility

Set a mandatory expiration date when sending employee surveys. After the deadline, the form is no longer available.

Economic data on consumption invoices

You can now see the total amount and currency on your electricity, gas, and water invoices directly in Dcycle.

March 26, 2026

Description and files in historical emissions

You can now add descriptions and attach evidence files to your historical emissions for better documentation and traceability.

March 25, 2026

Custom nonconformity types

Define and manage custom nonconformity types for your organization, adapting the taxonomy to match your team’s processes.

Pivot table hierarchy filters

Filter pivot table widgets by any hierarchy value (facility, scope, country, etc.) directly from the dashboard, both inline and from the config panel.

March 24, 2026

Improvements in ISO projects

You can now define shared objectives across ISO projects and attach evidence files to nonconformities.

March 19, 2026

Intensity metrics in pivot tables

Divide any emissions metric by revenue, employees, or any intensity group right in your pivot table. Compare and report with full context.

Layoffs pivot table

A dedicated pivot table for layoffs: filter by year, month, gender, contract type, end reason, and more. Spot trends and report accurately.

LCA projects

All LCA work now lives inside a dedicated LCA project. Existing LCA clients have been automatically migrated.

March 18, 2026

Move multiple invoices between facilities

Select multiple invoices at once and move them to another facility in a single step, instead of editing them one by one.

March 17, 2026

ISO management systems

Manage risks, nonconformities, and corrective actions for your ISO certifications directly from Dcycle.

Custom output data in GRI reporting

Create your own data points, assign owners, attach evidence, add texts and visualizations. They land straight in your report with ID ordering and advanced filters.

March 13, 2026

Bulk upload of custom emission factors for purchases

Upload custom emission factors and purchases in bulk from CSV or Excel files in the purchases category.

March 10, 2026

Dynamic charts

Turn any pivot table in your visualizations into a dynamic bar or pie chart. Explore your data with drill-through on both axes and dynamic tooltips, fully compatible with existing configurations.

Mentions in comments

Mention any team member directly in comments using @. They receive an automatic notification so nothing is missed.

March 9, 2026

Organization tree via API

Retrieve your complete organizational hierarchy through the public API, from the holding company down to all subsidiaries.

March 6, 2026

Bulk upload for facility consumption

Upload electricity, water, and fuel consumption data for all your facilities in bulk using a single file.

Multi-currency purchases

Create purchases in currencies other than euros, with official exchange rates from the European Central Bank.

March 4, 2026

GLEC logistics projects

The easiest way to measure your logistics carbon footprint in compliance with the GLEC framework. Everything in one place, with traceability, precision, and visibility for every shipment, route, and data point.

Import external emissions

Include any emissions calculated outside of Dcycle into your carbon footprint.

March 2, 2026

Projects API

The Projects API is now publicly available in the Developer Center, allowing you to create, retrieve, update, and delete projects directly from your integrations.

February 26, 2026

Impact dashboard for Life Cycle Assessments

Visualize the environmental impact breakdown of your products by life-cycle stage with a new interactive dashboard.

February 24, 2026

Fiscal year grouping in pivot tables

Pivot tables now support fiscal year grouping, aligning your data analysis with your organization’s accounting calendar.

Calculate the usage of your sold products

Automatically calculate the emissions from the use of your sold products (GHG Protocol Category 11) with the reinvented product use functionality.

February 20, 2026

Accidents and absenteeism pivot table

One dynamic view for all your occupational health and safety data. Connect data straight into your GRI report.

Waste management pivot table

Your waste data, ready for all your use cases: ISO 14001, Waste Logbook, EcoVadis, sustainability reporting, and more.

February 18, 2026

Commuting surveys in French, Ukrainian, and Polish

Commuting surveys are now available in three new languages: French, Ukrainian, and Polish.

February 16, 2026

Bulk data select and delete

Select and delete data at the record level, moving from file-based deletion to true data-level control.

February 13, 2026

Support portal redesigned

We’ve improved the conversation experience in the support portal to make it clearer and more intuitive.

February 10, 2026

Auto-distance calculation in bulk commuting

Bulk commuting uploads now automatically calculate distances when origin and destination are provided, removing the need to manually enter kilometers.

February 9, 2026

Customizable table columns

Choose what information to view in your tables and adapt the platform to your way of working with customizable columns.

New roles and advanced permission control

Redesigned roles system with new predefined profiles and customizable permissions, so every team member gets exactly the access they need.

February 6, 2026

Google and Microsoft sign-in

Sign in to Dcycle with your Google or Microsoft account, quickly and securely.

February 3, 2026

Custom attributes to classify your data

Create smart rules and automatically classify your data with custom attributes. Define conditions and labels to organize your information dynamically.

Bulk employee commuting upload

Upload employee commuting data in bulk from a single file.

February 2, 2026

Introducing Hub

Upload all your documentation (invoices, reports, records) in one place and assign it where it belongs. No jumping between screens, no losing files.

January 28, 2026

Visualizations from your Excel

Create visualizations directly from your Excel files. Upload your file and start visualizing your data in seconds, with the same level of customization.

January 23, 2026

Vehicle consumption calculation transparency

View all the calculations, factors, and data behind each vehicle consumption impact. Full transparency so you can justify, validate, and trust your results.

January 22, 2026

Bulk logistics data upload

Process up to 5,000 shipment records in a single API request, dramatically reducing the time needed to load daily logistics operations data.

January 20, 2026

Custom visualizations in EINF reports

Assign the visualizations you create in your projects to any section of your custom report.

January 15, 2026

New vehicle attributes

Add additional details to your vehicles, such as the registration year, market segment, or size, including electric and hybrid models.

January 13, 2026

Training hours pivot tables

Visualize your group’s own workforce training hours as a pivot table, with complete flexibility.

Default visualizations in projects

When you create a new project, the visualizations usually included in its reports are now created automatically.

January 12, 2026

File preview

See Excel, PDFs, images, and documents right where you work. No downloads, no extra steps.

Simplified EINF/GRI projects

Centralize, organize, and complete your reporting data in one place with full traceability, collaboration, and visibility for every file and data point. New “Data to Report” feature for EINF-GRI projects.

January 8, 2026

Data status dashboard for carbon footprint projects

A new unified control panel that gives you full visibility over the quality of your data. Spot issues instantly and fix them in one click.

January 5, 2026

New pivot tables for carbon footprint

Build fully customized emission tables that follow the exact structure of the GHG Protocol and ISO 14064, leveraging every category and subcategory.

December 29, 2025

Full data attribution and traceability

Every data point matters. All records created on the platform now include additional information so that attribution and traceability are fully transparent. You can see who created or modified each record and when.

December 23, 2025

Public Purchases API

Integrate your procurement data directly into Dcycle via the new Public Purchases API. Fully documented in our technical documentation, the API lets you automate the flow of purchasing data into your carbon footprint calculations.

December 10, 2025

Emission factor visualization for vehicles

Ever wondered which emission factor Dcycle uses for your vehicle calculations? Now you can see not only the database and its version, but also the exact name of the emission factor applied in each case.

December 9, 2025

Data status dashboard for carbon footprint projects

A unified control panel under Carbon Footprint showing status cards for processed, to review, with errors, and processing data. Click any card to jump directly to the filtered view and fix issues. Available for projects created after January 1, 2025.

Combustion data validation flow (Beta)

A redesigned validation flow that starts from the data source rather than the facility. Adds visibility, traceability, and validation steps before CO2 calculation. Available as a free early-access beta.

December 5, 2025

New pivot tables for carbon footprint

Build fully customized emission pivot tables matching the GHG Protocol and ISO 14064 structures. Break down data by category, subcategory, and activity for comparative visualizations and reports.

November 26, 2025

OpEx/CapEx classification in purchases

A new “Type of expense” field in purchases distinguishes between operational expenditure (OpEx, mapped to Scope 3 Category 1: purchased goods and services) and capital expenditure (CapEx, mapped to Scope 3 Category 2: capital goods). This ensures your Scope 3 emissions are categorized correctly.

October 14, 2025

Automatic Scope 3 Category 3 calculation

Dcycle now automatically calculates Scope 3 Category 3 emissions (fuel production, electricity generation, and transmission and distribution losses) from your electricity and combustion invoices. Results are available in reports, dashboards, and visualizations.

September 15, 2025

EINF management and ESRS transition

Check whether your existing non-financial report (NFRD) complies with the new ESRS standards. Identify gaps, assign data responsibilities to team members, and generate NFRD reports aligned with ESRS to prepare for CSRD.

August 14, 2025

Automatic social data upload

Automate the input of social data including accidents, absenteeism, and training records. Assign department-level tasks to data owners and extend your ESG management from EINF toward ESRS compliance.

August 4, 2025

Download consolidated Scope 1, 2, and MITECO data

Export consolidated reports at holding level or by company, including Excel files for Scope 1 and 2 emissions and MITECO registration. Self-service downloads without needing support from the CS or data team.

July 31, 2025

Custom emission factors in LCAs

Use your own emission factors in Life Cycle Assessments to leverage primary supply-chain data. This improves audit and tender traceability and supports ISO 14067 and PEF standards.

Add waste data to your LCA

Enter waste directly in the LCA module via the Resource Manager, either manually or through Excel upload. Dcycle links each waste type to the correct Ecoinvent reference for use in process blocks.

Reuse LCAs within other LCAs

Save any LCA as a reusable block (raw material, process, waste, or energy) and drag it onto another LCA’s canvas. This eliminates duplicate work when products share components.

Datadis electricity bill splitting

Split Datadis electricity bills across multiple facilities or organizations. From the Datadis integration settings, assign a consumption percentage to each facility connected to a VAT ID.

July 30, 2025

Smart sustainability reports (EINF)

Generate EINF reports directly in Dcycle. Start from scratch or upload a previous report for AI to process. Built-in traceability, data reuse, and team collaboration throughout the reporting workflow.

Social data input and visualizations

Upload social information (own staff, contracts, salaries, certifications, business strategy) in the Data tab. Generate EINF-ready visualizations including pay gap analysis, employee counts, layoff data, and average compensation with filters.

July 11, 2025

Download LCAs in Excel

Export your Life Cycle Assessment data and impacts to Excel in one click. Choose which impact categories to include in the download.

June 13, 2025

Redesigned navigation menu

The main menu has been reorganized around Company, Data, Improve, Extract, Support, and What’s New. The new structure reframes Dcycle as an operating system for sustainability.

June 9, 2025

Environmental KPIs and custom project views

Create custom KPI views such as emissions per plant, water per unit, or any ratio you need. Choose quarterly or semiannual periods, switch between table and chart output, and export as PNG. Works across EINF, ISO 14001, CSRD, EcoVadis, and ESRS.

Bulk vehicle consumption from parent organizations

Import vehicle consumption data to multiple child organizations at once via a single Excel file. Deleting the file from the parent removes all associated data across subsidiaries.

June 6, 2025

Group-wide visible tasks

Tasks created when opening a project are now assigned to all companies in your group. Each company sees and completes its part, while the group admin tracks overall progress.

June 5, 2025

Validated status in project tasks

A new optional “Validated” column on the project task board lets you mark tasks as validated after review. Remove the column to return tasks to completed status.

May 27, 2025

AI-powered OCR for international electricity bills

Upload electricity bills from facilities outside Spain and let Dcycle extract and validate the data in seconds. The OCR engine now supports international invoice formats.

May 19, 2025

Custom dashboards for water and waste

Build custom dashboards inside your projects to filter and compare data by period (quarter, year, month, or custom range). Add comments with full traceability and share dashboards with one click.

May 13, 2025

Introducing Dcycle Projects

A new way to organize your ESG work. Create projects with auto-generated tasks, assign owners by KPI, data type, facility, or company, and track progress from a unified view. Available first for carbon footprint projects.

May 2025

ISO 14064 report

Generate editable, audit-ready ISO 14064 reports following the GHG Protocol structure. The report is ready for third-party verification out of the box.

GBP currency in purchases

British pounds (GBP) are now available for spend-based purchase calculations, expanding currency support for organizations operating in the UK.

April 2025

Double materiality assessment

Run your CSRD double materiality assessment directly in Dcycle. Identify and evaluate the sustainability topics that are material to your organization from both impact and financial perspectives.

March 2025

Corporate Single Sign-On (SSO)

Sign in to Dcycle using your organization’s identity provider, such as Microsoft Entra ID or Okta. SSO simplifies access management for IT teams and ensures employees use corporate credentials.

Two-factor authentication (2FA)

Add an extra layer of security to your Dcycle account with two-factor authentication. Available for all users alongside the new SSO integration.

Custom roles and permissions

Configure granular user roles with fine-tuned permissions. Admins can define exactly what each team member can view, edit, or manage across the platform.

February 2025

Datadis integration for automatic electricity data

Connect your Datadis account to automatically import electricity consumption data from Spanish distributors. No more manual invoice uploads for electricity: the integration pulls data directly into your carbon footprint calculations.

Built-in collaboration on data and files

Team members can now comment directly on files and data points within the platform, replacing email-based discussions. Every action is tracked with full audit trails showing who submitted, commented, and validated each record.

January 2025

Redesigned platform: project-based ESG management

Dcycle transitioned from the previous “Measure, Improve, Communicate” model to a project-based ESG management system. Teams can now structure work by regulation, client, or facility, with the platform automatically generating the necessary tasks for each project.

New navigation menu

The platform menu was redesigned around seven core sections: Home and Projects, Organization and Teams, Data and Integrations, Downloads and Reports, Improvements and Action Planning, Support and Academy, and Updates. The new structure makes it faster to navigate and find what you need.

Waste data PDF reading re-launched

The AI-powered PDF reading feature for waste data returned after being temporarily removed in Q4 2024 for quality improvements. The updated version delivers more accurate data extraction from waste management documents.

December 2024

SFC accreditation for carbon footprint verification

Dcycle obtained accreditation from the Smart Freight Centre, validating the platform’s methodology for calculating logistics and transport emissions under the GLEC Framework.

AWS Technology Partner status

Dcycle became an AWS Technology Partner, strengthening the platform’s cloud infrastructure and expanding integration possibilities for enterprise customers.

November 2024

Improved data exports for BI tools and Excel

Exporting your data for external analysis is now faster and more flexible. Streamlined export flows make it easier to pull data into BI tools, Excel spreadsheets, and audit workflows.

October 2024

Server performance upgrades

Increased server capacity and infrastructure improvements significantly reduced application loading times, delivering a faster and more responsive experience across the platform.

Enhanced report transparency and emission factor visibility

Reports now include more detail about the data behind your calculations. You can see which emission factor databases are being used, their versions, and clearer on-screen explanations of how results are derived.